All we need is love

All we need is love
All we need is love

Saturday, June 23, 2012

Paracord Survival Bracelet Tutorial


Last week I saw some friends of mine wearing these cool Paracord Survival Bracelets. I asked where they got them and they said that they MADE them! Apparently they sell them at places like R.E.I. (Recreational Equipment Inc.) for about $10+, but you can easily make them for a fraction of the cost. In fact, we purchased 100 feet of cord (from R.E.I.) in 2 different colors for a little under $10. That will make you a ton of them for yourself and to give away as gifts. 

Here's what the two toned ones look like. They are reversible, so it's like getting two bracelets in one! That's Aria's favorite part about them. I agree, but really the best part about them is that they are made out of about 6-8 continuous feet of very strong utility cord that can be disassembled in the event of an emergency and used for whatever the need. They are perfect to wear when camping, fishing, hiking or any outdoor activity where emergencies may arise.







 Plus- they are easy enough that the kids can make them! 

Today, they made themselves one, plus one for their dad, and their uncles for their birthdays!




Here's out tutorial explaining how to make them. The hardest part is getting started, but once you have done one, you can do another in about 10 minutes time.

Paracord Survival Bracelet Tutorial








First gather your supplies. All you need is a lighter, a pair of scissors and at least 10 feet of utility cord or paracord. I'm sure you can buy it other places, but we bought it at R.E.I. You can use two colors like we did, but that's not essential, we just like the way it looks.









Next, take the end of each color of cord and fray them a bit with your fingers. Then, melt them with a lighter for about 15-20 seconds until they liquify a bit and then join them together firmly, pressing with your fingers as they cool. Be careful not to burn yourself in this process. 

It should look like this when it's fused. It helps to give it a couple good tugs before your continue to ensure that you have a secure fusion.
Once you have fused them, fold it in half from the center and measure 3-4 feet of doubled cord, then cut. This will give you 6-8 continuous feet of cord.




(You will need no more than 6 continuous feet to make a child or woman's bracelet and up to 8 to make a grown man's bracelet.)



Now, take another piece of cord and fold it in half. Make this long enough to wrap around your wrist plus a couple of inches. You want to tie a knot in the open end. The bracelet should be long enough so that when it's completed, the knot will slip through the loop in the end and stay on your wrist. 


I'll refer to this as the bracelet base.


**Here's a reference for how long to make the bracelet base:
Aria's base- from the inside of the knot to loop end was 6 inches (she's 10)
My base- from inside of the knot to loop end was 7 inches  (I'm an average adult woman)
Greg's base- from inside of the knot to loop end was 9 inches (he's got big burley man hands :o))




We took this old scrap of wood from the garage that had screws in it to hold our cords while we wove it, but it isn't necessary. Aria make one while Cole was using the wood piece by taping the end to a table. Just use your creativity and you'll find a way to make it that works for you. 


So, take your bracelet base and secure it to something to stabilize it.
 





Next, place your fused cord behind it, with the jointed section in the center.




Take one side (in this case it's the blue side) and loop it over the bracelet base to form a backward "C".



 




Then take the other side (the black cord) and bring in over (or on top of) the blue cord. 









                                                                                         


Now bring the black cord behind the bracelet base like shown.










 




Pull the black cord up and through the blue loop like this.


Give it a nice tug and you should have your first knot! It should look like this. Make sure the jointed piece stays centered behind the bracelet base.










In the picture to the right, 2 more knots have already been tied. But I wanted to show you that once you have completed the last knot shown, you do the same process for the next knot, it's just reversed. Let me show you.
First make a "C" with the blue cord over top of the bracelet base. 








 Now, bring the black cord over top of the blue one.














Then, pull the black cord behind the bracelet base, as before.








Pull the black cord up and through the blue "C" loop.
















 Pull the cord tight and you will have made another knot!



Notice as you continue that one color will remain in the center and the other will flank it on the borders. This is how you will ensure you are doing it right.
Once you have knotted it all the way down the length of the bracelet base, trim the excess and burn the frayed end until it liquifies. Then press the melted tip into the side of the bracelet to secure it. If this step is not done correctly, your bracelet will unravel.
You can also trim the excess cord past the knot end and burn that as well to seal it.



So there you have it- your very own Paracord Survival Bracaelet! Now put it on and wear it proud! When an emergency arises, you just might be the one prepared to save the day!



17 comments:

  1. Thanks for a Great Tutorial!! Can't wait to make a few of these for camping!

    ReplyDelete
  2. These are really cool. They are a great project for kids.

    ReplyDelete
  3. My friend and I really wanted to make these. You can buy then but they are expensive. Thanks for the great tutorial!

    ReplyDelete
  4. Thanks for giving me a space in your blog. I refer this to my close friends who are already seeking for the Paracord .Thanks again guys…

    ReplyDelete
  5. So glad to know the post was so useful! Thanks for checking in!

    ReplyDelete
  6. Thank you! The kids can't wait to make these. Your tutorial is great and very informative. Love the pics!

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. I would really like to know what size paracord was used in the bracelets in the first photo at the top of the page, they are fantastic, and the definition of the center weave is extraordinary, I've not seen anything like that. How did ya get it to zig zag back n forth with so much space in between the cords? Its amazing! I have made dozens of Cobra knot bracelets, but have never had that happen, please share the details on the Paracord size and type....awesome work!

    ReplyDelete
  10. i am looking for detail about your product please leave message.

    ReplyDelete
  11. That one is a basic makrame knot, I would like to ask though why are they called survival bracelets?

    ReplyDelete
    Replies
    1. I'm not a survival expert or even a "survivalist" as I don't do prepping etc, but I do have a family member who does. Paracord is a very handy item to have and it would be tremendous to have if someone were ever forced into a survival situation in a remote area where help isn't likely to be found for quite some time. People who camp a lot keep paracord handy because you just don't know how useful it can be in a lot of situations. I myself have used paracord to tie down large and even somewhat heavy objects in the back of my truck. You just have to use a lot of it as it's rated at 500 pounds test. That is amazing tensile strength for such a thin line, so it can be used to great effect for a lot of tasks.

      Delete
  12. Could I use a buckle on this bracelet instead of the diamond knot? I'm not good at it yet...

    ReplyDelete
  13. still looks like it makes a binding knot(so there's no quick release) I made a quick one wherein I used a single paracord, doubled it up on the inside, knotted it one the end like you did.... so a loop on one end and a knot on the opposite, and just turned a spiraling hitch down the line... so when I put it on I can cinch it up like yours and the loop won't fall off the knot. But if it's to be useful, one can't sit there for hours unknotting the thing when you need lengths of paracord to tie something off.

    ReplyDelete
  14. Paracord bracelets are the best survival gear that you should have. It's so easy to make and very inexpensive. I've watched tons of tutorials and I had lots of these made which I give to friends and family. Even if my parents are not going out to camp anymore, they appreciate these around the house. It's very versatile and provide a lot of useful help. For more tips and craft, see http://myoutdoorslife.com/diy/paracord-bracelet-instructions.html

    ReplyDelete
  15. Best bracelets designed by fashion architects, handmade by craftsmen and blessed by Buddhist monks now at reasonable prices in USA .Sign up today to get attractive discounts!

    buddhist bracelet
    meditation bracelet
    blessed bracelet
    blessed bracelet
    exotic wood bracelet
    buddhist bracelet

    ReplyDelete